Features:
1. Display only start: when the car brakes, trigger car radar, so not to detect obstacles, display does not start.
2. Three voice switch: switch button on the display, three types of alarm sound can switch each other, human voice, buzzer or mute.
3. Smart continue work: 8 probe radar, working in brake triggered when the car radar, when loosen the brake, the radar no power supply at the moment, still can continue to work for 15 seconds.
4. Eight side display: display with eight cursor, each cursor independenty for each probe, intelligent distinction between obstacles.
5. Dual-core work: detection and feedback the information is accurate, fast and avoid the delay of the data.
Specifications:
Front Sensor Detection Range:0.3M~1.2M
Rear Sensor Detection Range: 0.3M~2.2M
Rate voltage: 12V DC
Rate current: 100mA - 300mA
Ultrasonic frequency: 40KHz
Control moudle working temperature: -30 - 80 celcius degree
Display working temperature: -20 - 70 celcius degree
Sensor diameter: 22mm
Installation mode: Drilling Sound: Heart beat type, more recent alarm more rapidl
Digital LCD display (number & light). Help to provide increased safety for passengers, pedestrians and family members who happen to be around the moving vehicle
Package Included:
1X Display
1X Control Unit
8X Sensor
1X Drill
1X Manual
1X Sticker
1X Power Cord
4X Sensor Cable Extension Line
- When the product is working, the sensor emits ultrasonic waves. When encountering an obstacle, the ultrasonic waves are reflected. The sensor receives the reflected signal and transmits it to the control box. Through calculation, the control box obtains the distance between the vehicle and the obstacle, and reminds the driver to pay attention through the display and sound, etc., to avoid danger. It is a good helper for us to drive the car!
- 1: When reversing, activate the rear 4 sensors and the front 2 sensors to detect and alarm. During normal driving, when braking, the 4 sensors in front of the car are activated to assist the driver to safely pass through narrow passages. When you release the brake, the parking sensor will work for about 15 seconds before stopping.
- 2: The product alerts the driver through sound, numbers, and light bars at the same time.
- 3: Probe behind the car to prevent collision, probe in front of the car to prevent rubbing.
- 4: On the display, there are 8 light bars representing each sensor, allowing the driver to distinguish the orientation of obstacles.
- 5: The product has three alarm sound modes, real voice/beep/mute, which can be switched between each other.
- 6: The product has 7-speed volume adjustable.
